Four Common Boiler Problems You Are Likely to Experience

A boiler has a vital place in the home and needs to run at full efficiency. If a boiler isn’t able to run efficiently there is the potential for it to not give the desired level of warmth or might break down entirely. By conducting simple checks to the electronic programmer, time switches and thermostat, you are often able to make certain a boiler is set up correctly.

If you do believe that you might have a more serious issue with the operation of the boiler, it is rarely advisable to attempt any of the more difficult repair or servicing jobs. They should be left to the gas safe registered engineer who is fully approved and qualified to complete such work. Also, to make certain that a heating system and boiler is able to work efficiently, it will generally benefit to have an annual service completed by the engineer. This should help with limiting problems in the future and needing to make the emergency calls which can be quite expensive.

Here are some of the more common Cv ketel vervangen problems that can be checked prior to calling on the services of the qualified professional:

Thermostat: It will always benefit to have a fully functioning thermostat in place. A thermostat is likely to lose its accuracy over time, which will result in misleading temperature settings and switching the heating on and off at the wrong times. Even though it is possible for the gas engineer to recalibrate and repair the existing thermostat, it is more likely to be just as cost-effective to have a replacement thermostat installed.

Programmable and set-back thermostats are designed to heat the house when required and can easily turn down the heating when it isn’t needed. This means it is possible to be that much more energy-efficient. A modern programmable thermostat is likely to be able to cut the cost of heating the home by up to 20%.

Electronic programmers: If you do start to experience issues with the running of the boiler, a check of the relay, circuit board electronics, and LCD display is certain to be required. Most of these components can easily be purchased at a local DIY store to replace the existing parts that are in place.

Condensate pipe: A condensate pipe is necessary for transferring the boiler condensation to an outdoor pipe. If you have recently experienced a sudden cold snap, the result is that this essential pipe could freeze, which will result in a blockage and eventually the boiler is likely to shut down. Indications of a frozen pipe include bubbling or gurgling noises from the condensation pipe or boiler. By taking the necessary action to slowly defrost on the right should help with eliminating the problems.

 

Leave a Reply

Your email address will not be published. Required fields are marked *